Cartridge filter housing are essentials end filters which are used for Sterile Liquid Filtration before filling it into any shape for its end usage. This primarily gives super clarity by removing extraneous particle  & extra sparkle to solution. Any finitely impurities, colloidal matter etc. which escape un-trapped in preliminary filters are easily separated in these filters. Micron Cartridge Filters are in line units capable of working at a maximum line pressure of 5 kg./sq. cm.

Available in various models with Capacities of 100, 500, 1500 Litres. Filter Housing are available in sanitary design to sterile filtration of air and liquid. All the filter housings are supplied with pressure gauge, air vent valve, drain valve and support lets with optional material of

Construction Details

Filter cartridge of Cellulose/Polypropylene material are used. Depending upon the clarity level required, we provide the cartridges in the size of 0.2, 0.4, 1, 2, 3, 4, & 5 micron porosity. No. of cartridges & their lengths material. Buffer plate & cartridges support assembly in S. S. 304 or 316 material only. Housing consists of a sturdy vertical pressure vessel having a buffer plate on which filter cartridges are mounted vertically a detachable top cover enables easy & quick removable of cartridges for CIP/SIP purposes.

Enquire Now   Watch Video

Working

Water is admitted in the fitter, chamber as indicated & surrounds all cartridges .Through very fine apertures of cartridges, it seeps into the interior of each cartridge & then descends down to collecting chamber, from which it goes out. It is necessary to clean the cartridges of the accumulated impurities after certain interval of time. For this, by opening the top lid, all the cartridges are to be physically taken out a brushed carefully using soft brush or cloth under flow of water. Online filtration system complies with current Good Manufacturing Practices and the requirements of Indian, British and the United States Pharmacopoeia of Water for Injection. All documents related to Factory Acceptance Test (FAT) like Installation Qualification (IQ), Operation Qualification (OQ) and Performance Qualification (PQ) are provided as a part of the operating manual.

Application

Sterile liquid filtration elements are used to remove impurities from liquids. Micro filtration elements have membranes with pore sizes ranging from 0.1 to 10 µm. Ultra filtration elements are designed to remove particulates between 0.001 and 0.1 µm. Synthetic filtration media for liquid filtration elements include plastics such as polyethersulfone (PES), polypropylene (PP), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyvinylidene chloride (PVDC), and polysulfone (PSU). PES is a high-performance polymer that provides excellent resistance water and steam.