Pure Steam Generator produces Pyrogen Free, WFI vapor for Sterilization demands in various equipment’s i.e. Autoclaves, WFI pipe looping, Equipment’s, and Filters etc. Here pure steam is produced by evaporating feed water the heat exchanger using plant steam. Pure steam generated from this equipment surpasses steam quality test i.e. Non condensable gases, degree of super heat & saturation test as per requirement.

INTERTECH Pure Steam Generator has unique three stage pyrogen removal system which includes a special design centrifugal separation followed by separator. Impure water is removed using unique purging system. This ensures endotoxins removal exceeding log 3 reduction.

CONSTRUCTION DETAILS:

• EVAPORATOR – This is double tube sheet shell & tube type heat exchanger in SS 316L. Plant steam gives heat to feed water in tubes. Special down pipe creates convection current to prevent water stagnation.
• SEPERATOR – Multi direction baffles placed in separator forces steam to pass thru it & water gets separated by gravity. Entrapped vapor is subjected to centrifugal force & finally passes through the demister pad to finally give PURE STEAM
• SAMPLER – It is provided at pure steam outlet from separator. This is basically a heat exchanger with sanitary diaphragm valve. Conductivity measurement is also done simultaneously.

FEATURES:

• Complete steam quality as per En 285 and HTM 2010.
• Test for Dryness fraction, Non-condensable gases & degree of super heat is also possible
• All pipes & tubes are as per ASME BPE stamping with les than 0.5 Ra
• PLC with SCADA duly validated as per 21 CFR part 11
• Piping system is with electro-polished pipe with orbital welding, sanitary fittings & pharma grade gaskets
  
  

  Enquire Now   Watch Video