- INTERTECH TECHNOLOGIES PVT. LTD.
Engineers to Healthcare Industry®
Wet glue labelling machine
|
LABELLING MACHINE automatically labels round containers glass plastic, with wrap-around labels in the vertical position by using cold glue. IET - 120 is rugged, versatile and engineered for reliability and enhance operational efficiency. In addition, it has several exclusive feature which offer additional advantages.
O P E R A T I O N
-
The round container is transferred on to the moving conveyor from the in built UNSCRAMBLER and positioned accurately by a FEED WORM for wrap-around operation at the labeling point.
-
The rotating glue cylinder receives cold glue from the GLUE POT which subsequently gets transferred on the GLUE RUBBER ROLLER. Finally a fine, even and thin film of glue is transferred on to the gluing pad.
-
The round container on the moving conveyor at the FEED Worm Actuates a sequence switch result in the oscillation of the LABLE BOX
-
The rotating GLUING PAD which a aligned with oscillating LABLE BOX picks up only one label each time.
-
The PICK-UP CYLINDER receives labels with the help of pick up fingers from the GLUING PAD. The PICK-UP CYLINDER holds the labels perfectly due to vacuum during its rotational movement. Simultaneously the pick-up fingers move inside.
-
The round container which is positioned by the FEED WORM at the labelling point is now wrapped around with the glued label when the round container rotator by virtue of strip belts of the PICK-UPCYLINDER finally the moving container further passes through a rubber PRESSING BELT which ensures neat and perfect fixing of the label.
|
SALIENT FEATURES
-
Stainless Steel cladding or hard chrome plating of all exposed pars to ensure long life and resistance against corrosion.
-
Special self-aligning bearings help in quick assemble during periodical maintenance of the unit. They also allow more flexibility in maintaining tolerances.
-
‘No container, No label’ - an electrical sensing device avoids wastage of labels, it also helps in keeping the unit neat and clean.
-
Minimum changeover time is required from one size of container of label to another.
-
Quick change of speed or the adjustment of the complete system and synchronization is possible manually with the help of a hand wheel provided on the side of the unit.
-
An in-built Digital counter provides continuous information of the total number of containers labeled.
-
Suitable for overlap labeling and flag type labeling where the length of label is more the circumference of the container.
-
A highly efficient vacuum pump develops just sufficient vacuum to hold labels-big or small on the pick-up cylinder.
-
A specially designed variable speed gear box works silently.
-
Complete protection of the motors is ensured by the contracts and relays of appropriate ratings.
-
The un-scrambler in an integral part of the IET-120 which is synchronized with its main drive. Any variation of the speed of the unit result in a proportion change in the speed of the un-scrambler.
The special feature of IET-120 helps in receiving containers through the protected enclosure, thereafter unscramble correctly and finally guide the same with the help of guide rails on to the conveyor for correct orientation of the required proportional speed.
|
Technical Specifications |
| Output/Hour |
3000 to 6000 Bottles (Depending on the size of container & label |
| Electrical Motor |
0.75HP/440Volts/3Phase/50Hz(Four wire) For Main drive.
0.5 HP/440 Volts/3Phase/50Hz (Four wire) for Vacuum Pump |
| Conveyor Height |
770 mm to 840 mm Adjustable. |
| Container Size |
DIa 16 mm to 100 mm, (With the help of required change parts) |
| Label Size |
Length 20mm to 165mm (With the help of required change parts)
Width 16 mm to 90 mm (With the help of required change parts) |
| Overall Dimension |
3000 mm (L) X 1070 mm (W) Approx |
|
|
|
